Promotions Convenience Store Owners Can Offer to Maximize the Gas Station Profits

An empty, poorly managed fuel station

Due to market competition and ease for new entrants, existing service station owners may find it challenging to drive more sales. You must understand that the target customers for your fuel station are interested in more than just getting gas. They want exemplary on-spot service and diverse offerings at service stations. Facility owners need to come up with effective promotional strategies to boost brand awareness and traffic.

Continue reading

OPW Edge Double Wall Spill Container: Missing Assembly Notice & Instructions








IMPORTANT: EDGE DW Visigauge!!

At this time, OPW Edge DW Spill Container is being shipped without the Visigauge assembly due to a shortage from their vendor.

The product is being produced with a temporary plug cap in its place to allow the factory and the installer to perform the interstitial test to verify the integrity of the containment.

We apologize for the inconvenience and OPW will send out a replacement Visigauge to distributors who purchased this product. It will include a Visigauge assembly and one replacement o-ring seal.

Once you have received the Visigauge, please follow these instructions to install it. (Click here to read OPW’s Edge PDF)
Step 1: First, identify the temporary plug cap as the part with the hexagonal shaped head that is installed at the top of the round white gauge riser.
Step 2: Please unthread the temporary plug cap from the round white gauge riser.
Step 3: Next, install the replacement 0-ring onto the underside seat of the Visigauge as shown below.
Step 4: Finally, thread on the Visigauge into the white gauge adapter. This should be tightened to a quarter turn past finger tight.
Step 5: The Visigauge is now installed and the spill container can be vacuum tested to verify tightness.
OPW Edge Temp Plug


NOTE: Spill Containers with this plug installed will be identified with the below label beside the OPW part# label on the outside of the box.
OPW Edge Modified Label


OPW Edge Temporary Plug Images


Looking to purchase OPW products, you can find them online at johnwkennedyco.com ?  Can’t find what you are looking for? Not to worry – feel free to contact us by email or give us a call at 1.800.238.1225.

OPW Engineered Systems OPW Retail Fueling
OPW Engineered Systems Fibrelite OPW Fuel Management Systems OPW Retail Fueling
OPW Engineered Systems Fibrelite OPW Fuel Management Systems OPW Retail Fueling

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

Safely clean your Passport screen with this quick tip








Passport Clean Screen
Disinfect your Passport screen without accidentally shutting off your pumps.

Click image to view/download quick reference card


Here’s how:

Click on the links below.
Not only will you have access to these videos but very handy reference cards that can be downloaded and printed!!
These are just a few of the videos. There are many more videos to explore once you click on the links!

CASHIER INSTRUCTIONS

BALANCE PREPAY CLOSE THE TILL
CLOSE THE TILLCLOSE THE TILL
CONDUCT A TILL AUDITCONDUCT A TILL AUDIT

MANAGER INSTRUCTIONS

CHANGE FUEL PRICESCHANGE FUEL PRICES

 

CREATE RESTRICTION GROUPSCREATE RESTRICTION GROUPS
DIGITAL ADSDIGITAL ADS

EXPRESS LANE SELF-CHECKOUT INSTRUCTIONS

ADD ITEMS TO TRANSACTIONADD ITEMS TO TRANSACTION
ATTENDANT AUDIO ALARMATTENDANT AUDIO ALARM
AUTHORIZE AGE RESTRICTED ITEMAUTHORIZE AGE RESTRICTED ITEM

Looking for Gilbarco equipment? Click on the links below to visit our web store :

Pumps & Dispensers
Passport Point of Sale
Gilbarco Passport Point of Sale
Forecourt Payment Options
Gilbarco Forecourt Payment Options
Forecourt Merchandising
Gilbarco Forecourt Merchandising Options

Click here to search all Gilbarco equipment and parts listed in our web store.

Do you have any more questions about Gilbarco Passport POS system or require service? Feel free to call us at 1.800.451.4021 or email us using the link below:
EMAIL US

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

Gilbarco Passport Edge EOL Notification








Gilbarco Passport Edge

Passport Edge EOL

Product End of Life Notification | July 23, 2021

This is a notice that Gilbarco has decided to end of life the Passport Edge product. Gilbarco has stopped selling new hardware and services for Passport Edge as of July 1, 2021. We sincerely appreciate your support of the Passport Edge product, and your understanding with any inconvenience caused by this end of life.

Service End Date: On December 31, 2021, all existing Passport Edge services will be terminated. The services included are help desk, Insite360, hardware warranty, and software updates. Until Cancellation a site will continue to be invoiced for their Passport Edge system and/or service. All invoicing for Passport Edge systems and service will cease December 31st if the contract has not been cancelled prior to that date.

The cancellation agreement can be found here.

Replacement Options: Gilbarco will waive all Passport Edge subscription cancellation fees. We will also offer sites the ability to keep the existing Edge hardware. The site will need to purchase a Passport trade-up and receipt printer (the IP based Edge receipt printers are not supported by Passport). They can utilize most of the Edge hardware including PIN pads, cash drawer, UPS, keyboard, mouse, etc., in order to minimize replacement costs. An annual PSO contract will also be required between the site but reactivation fees will be waived if necessary until the end of the year. The site can contact contract services at 1-866-606-8969 to sign up for PSO.

Existing Hardware: For all existing Passport Edge hardware, the title will transfer to the end customer, and can be re-purpose or donated.


Please feel free to contact us at 1-800-451-4021 or Email Us with any further questions or inquiries prior to December 31, 2021.


The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

Is Water In Your Fuel System Causing Corrosion?








Veeder-Root logoTake the Veeder-Root our quick quiz to assess the factors affecting your risk for underground storage tank corrosion.

Is water in your fuel system causing corrosion?
TAKE THE QUIZ NOW!


Find Veeder-Root products in our Web Store!Veeder-Root TLS-450PLUS

Have any questions or would like to receive a quote for HydrX? Can’t find the Veeder-Root you are looking for?  No problem! Please feel free to contact us at 1-800-451-4021 or Email Us with any further questions or inquiries.


The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

Omntec CLD Series| Portable Containment Sump Tester








DID YOU KNOW…

…That sumps are required to be tested every 3 years for tightness according to EPA Regulation 40 CFR Part 280.35?
Here area few links to check out the text of the regulation: Govinfo.gov and EPA.gov.Omntec CLD Series Portable Sump Tester

Third-Party Certified For 15 Minute Test

The CLD Series Sump Tester is available in one to eight probe versions. Each system is conveniently stored in a durable case equipped with wheels for ease and accessibility.  Pull up, set up, and test in as quick as 15 minutes. Results print out and can be stored internally.

Each system includes:

  • (1) Case with wheels
  • (1) PROTEUS OEL8000III-CLD* microprocessor-based controller with printer
  • (1) RS-232 port
  • (*) MTG-probe input connectors (1 per probe)
  • (*) MTG-probes with suspension chains with “s” hooks (1 per probe)
  • (*) 50ft MTG-probe cables (1 per probe)
  • (1) 12ft three-pronged power cord
    *quantities reflect CLD Series version purchased (ie. CLD 1, 2, 3, 4 ,5 , 6 7, & 8)
CLD Series Model Options
(includes all components above – click model # to see in our web store)
CLD3 – 3 MTG probes w/ 2″ stainless steel float per probe
CLD4 – 4 MTG probes w/ 2″ stainless steel float per probe
CLD6 – 6 MTG probes w/ 2″ stainless steel float per probe
CLD8 – 8 MTG probes w/ 2″ stainless steel float per probe

Omntec CLD Series Sample Print Out

ADVANTAGES

  • Third-Party Certified
  • Ease in programming
  • Tests are stored within the on-board microSD card
  • Flexibility and adaptability to different State and Federal regulations
  • Easy to understand graphical touch-screen display prompts

Omntec CLD Series O - M Manual
Omntec
CLD Series
O & M Manual
Omntec CLD Series Product Brochure
Omntec
CLD Series
Product Brochure
OmntecCLICK HERE to check out ALL Omntec Monitor Systems we currently have in our web store
Omntec Shop By ImageCLICK HERE to check out Omntec Monitor Systems Shop By Image feature

And if you can’t find what you are looking for contact us at 1.800.238.1225 or email us.

The John W. Kennedy Company appreciates your business and continued support!
JWK USA Logo

RED JACKET: CoreDEF Submersible Turbine Pump








Red Jacket |John W Kennedy Company

CoreDEF™: Submersible Turbine Pump (STP)

The Red Jacket® CoreDEF™ Submersible Turbine Pumps are a revolutionary solution that sets a higher standard in the optimization of diesel exhaust fluid (DEF) pumping infrastructure. The CoreDEF™ STP is the entirely customizable DEF pump, designed for a complete range of light to heavy duty submersible DEF applications.

Various motor sizes, Quick Set® variable lengths, and the only adjustable pressure relief offering on the market, make the CoreDEF pump a flexible solution that can be tailored to maximize value, while controlling cost.

With included pre-assembly and factory leak testing, the CoreDEF submersible DEF pump cuts out the stress and time of installation and get you pumping sooner.

Features & Benefits


Model Portfolio for Varying Applications:

• The CoreDEF Series Portfolio holds the perfect motor size for your site.

Factory Leak Tested – Diesel Exhaust Fluid is extremely hard to contain and even harder to clean up:

• CoreDEF submersible DEF pumps are factory-tested to prevent any possibility of leaks in the field.

• Using a competitive pump may allow leaks and crystallization, seriously complicating serviceability.

Adjustable Pressure Relief Option – Enables the user to adjust line pressure between 20-45 PSI, making for painless post-installation flow rate tuning:

• Optimize operation with any dispenser.

• Avoid excessive nozzle squeeze.

• Prevent nozzle spit back.

Product Compatibility:

• Designed for DEF consisting of 32.5% urea and 67.5% de-ionized water.

• Liquid Quality Compliance: The submersible pump and supplied components satisfy the ISO 22241 standard for DEF quality.

Motor Construction and STP Design:

• Durable stainless-steel construction for longevity and DEF compatibility.

• Capacitor stored in control box for simple installation, easy access and improved operation environment

• Pressure relief valve allows for continuous running and protects motor when nozzles are idle.

• Capable of 30 start/stop cycles per hour to prevent motor burnout.

• Portfolio of motors available to meet global power requirements.

• Check Valve available to maintain line pressurization during idle periods.


Adjustable or Fixed Pressure Relief

The Adjustable Pressure Relief Configuration is exclusive to the Red Jacket CoreDEF STP and introduces post-installation flow adjustment to your DEF pump. While the fixed pressure relief option is simple to specify and easy to install and provides exceptional performance and gets you up and running fast. With either configuration, Red Jacket takes the time to perform advanced factory leak testing on each unit to ensure tightness and reliability before arriving to the field.

Red Jacket® Adjustable or Fixed Pressure Relief Red Jacket® Adjustable or Fixed Pressure Relief
Red Jacket® INTEGRATED DEF MANAGEMENT SYSTEM

Superior Flow

INTEGRATED DEF MANAGEMENT SYSTEM

Integrating your site with Veeder-Root’s all-inclusive DEF management system gives operators the power to fight back against erratic leaks, messy cleanups, and temperature induced product degradation, associated with other DEF handling systems.

LEARN MORE

SPECIFICATIONS

Fuel Compatibility
• Diesel Exhaust Fluid* (DEF or Adblue)

• Meets ISO 22241 standard for DEF quality

*consisting of 32.5% urea and 67.5% de-ionized water

Motor Sizing
• 3/4 HP, 60 HZ, 1-phase

• 2 HP, 60 HZ, 1-phase

• 2 HP, 60 HZ, 3-phase

Line Pressure Relief Options
Fixed Pressure Relief (In Tank)
• Maintains Max Line Pressure of 45-50 PSI

Adjustable Pressure Relief (In Sump)

• Enables Post-Installation Line Pressure Adjustment range between 25-45 PSI

Hardware Construction
Column Pipe:
• Schedule 40 Stainless Steel

Impellers and Diffusers:

• Fiberglass reinforced

Pump and Motor Side Mechanical Seals:

• Silicon Carbide

Elastomers:

• FKM

Protective Coatings
• N/A
DEF Fluid – Operating Temperature Range
• +12°F to +104°F (-11°C to +40°C)
Installation Depth Range
Quick Set (Adjustable Length)
• D1 = 66” – 97”**

• D2 = 96” – 157”**

**Assumes 3/4 HP

Check Valve Compatibility
• CoreDEF Inline Stainless Steel Check Valve: 410881-001
Agency
Agency Listings:

• CSA (2HP Only)


Red Jacket CoreDEF STP Datasheet (576047-273)
576047-273 Red Jacket CoreDEF STP Datasheet
Red Jacket CoreDEF STP Configuration (576047-290)
576047-290 Red Jacket CoreDEF STP Configuration
Red Jacket CoreDEF STP Installation Manual (577014-360)
577014-360 Red Jacket CoreDEF STP Installation Manual
Red Jacket Product Guide (576047-310)
576047-310 Red Jacket Product Guide
DEF Recirculation Monitoring Solution
DEF Recirculation Monitoring Solution
Media-Isolated MAG Plus Probe Solution
Media-Isolated MAG Plus
Probe Solution

Buy Red Jacket Online at John W. Kennedy CompanyBUY ONLINE AT OUR WEB STORE

Can’t find what you are looking ? Have questions about Red Jacket or would like to receive a quote, please feel free to contact us at 1-800-451-4021 or Email Us with any further questions or inquiries.


The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

Franklin Fueling Systems EVO: NEVER STOP EVOLVING








EVO - Franklin Fueling Systems |John W Kennedy Company

EVO™ 200 & EVO™ 400: Automatic Tank Gauges

EVO™ 200 & EVO™ 400 Automatic Tank Gauges (ATGs) provide highly accurate inventory management and containment monitoring for small to mid-size fuel systems.


EVO™ 200 & EVO™ 400 ATGs

NEVER STOP EVOLVING

We are driven by our pursuit to innovate, simplify, secure, and connect every station owner to their fuel management system. EVO™ 200 & EVO™ 400 ATGs feature simple setup and operation, remote connectivity, and advanced security features to protect your fuel system while keeping you directly connected to vital site data whenever, and wherever.

Highly Capable

EVO™ 200 & EVO™ 400 allow you to make informed, data-driven inventory management decisions with features like, inventory monitoring, tank testing, and containment compliance monitoring.

Simple Interface

A full-color 7” LCD touchscreen serves up one of the most intuitive user interfaces available with simplified user features you won’t find anywhere else.

Secure Data

EVO™ Series ATGs keep your site in compliance and protected from security threats with customizable user roles, user activity tracking, and up to 3-years of data back-up to protect against power outages or other system interruptions.

TECHNICAL ADVANTAGES


Input Capacity Input CapacityEVO™ 200 can support any combination of up to 6 sensors and probes, while the EVO™ 400 can support any combination of up to 14 sensors and probes. Turbine Pump Interface Turbine Pump InterfaceEnhanced remote pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.
Remote Communication Remote CommunicationThe FFS PRO™ Connect web interface allows users to securely connect directly to an EVO™ Series ATG from any web enabled device. Inventory Reconciliation Inventory ReconciliationInventory Reconciliation is an automated leak detection function that analyzes tank volume, deliveries, and sales data to detect fuel loss or gains with a high level of accuracy.
Tank Autocalibration Tank AutocalibrationEliminate discrepancies in delivery reporting and daily reconciliations caused by inaccurate tank information programmed into the ATG with this function that automatically generates a highly accurate tank strapping chart. NEW: Flow Rate Monitoring NEW: Flow Rate MonitoringDetect and react to potential slow flow issues with automated daily reporting and alarms, helping to improve flow rates and dispenser throughput.
SIMPLICITY & VISIBILITY |John W Kennedy Company

SIMPLICITY & VISIBILITY

A full-color 7” LCD touchscreen serves up one of the most intuitive user interfaces available with simplified user features you won’t find anywhere else. You choose your home screen, you program your product colors, and you choose what shows up on your Favorites screen. Customize the interface to meet your business needs the way you operate.

Icon-Based Design

Icon-Based Design

Designed to be understood easily and operated intuitively. It’s simple to operate for new users and can reduce the amount of training required to operate.

One Touch Buttons

One Touch Buttons

You can customize these home screen buttons to automate and carry out anything from complex, multi-function processes to simple daily delivery report generation – all with the touch of a single button.

Quick Jump Menu

Quick Jump Menu

Navigate quickly from application to application with ease. This time-saving menu makes the interface’s structure extremely shallow, simple to navigate, and reduces the amount of steps it takes to accomplish tasks.

SYSTEM SECURITY

SYSTEM SECURITY

EVO™ Series ATGs help keep sites in compliance while providing marketers with the highest level protection from the security threats facing our industry.

User RolesCustomizable user roles and log-in security protect against unwanted access and track user activity. Data Back-UpStores up to 3-years of data to provide back up security from power outages or other system interruptions. Secure WiFiOptional WiFi allows secure and protected onsite viewing of inventory levels for fuel delivery drivers.
REMOTE CONNECTIVITY

REMOTE CONNECTIVITY

The FFS PRO® Connect web interface allows you to securely connect directly to your EVO™ Series ATG from any web enabled device. It automatically scales for tablets and smart phones, meaning no app to download.

INTERACTIVE DEMO

FFS PRO® Connect FFS PRO® CONNECTFFS PRO® Connect displays real-time data allowing precise delivery scheduling and efficient site management. It also provide immediate notification of alarms so quick corrective actions can be taken.
Centralized ControlProvides centralized control of all compliance information – such as tank testing data and leak detection sensor status.
ReportingA wide variety of reports can be custom-scheduled, displayed, printed, or emailed at specific times.
Simplified SetupSimplifies setup and programming with the ability to download specific sections or the entire configuration from one ATG to another.
TURBINE PUMP INTERFACE

TURBINE PUMP INTERFACE

Turbine Pump Interface is a powerful tool that creates a network between your Submersible Turbine Pump (STP) controllers and EVO™ Series ATGs. Through TPI, the tank gauge can be programmed to respond to faults in the submersible pumping system and react with intelligence that pump controllers alone cannot.

SEE TPI IN ACTION

Pump In Water AutomationWhen the water level in a tank approaches the pump intake, the tank gauge will enter alarm mode and automatically shut down the pump, protecting the system and consumers from water being pumped from that tank. Leveling & Priority ModesWhen managing two storage tanks of the same product ‘Leveling Mode’ can keep both tanks at the same percentage full without the use of a syphon bar between the two tanks. Remote Pump InteractionBy networking the intelligent controllers to the fuel management system via TPI, a technician can remotely connect to the site to review the logged event history and view the status.
FLOW RATE MONITORING

FLOW RATE MONITORING

Improve dispenser throughput and maintain fast flow rates with the ability to detect and react to potential slow flow issues before they impact business with Flow Rate Monitoring. Available as a software option on new EVO™ Series ATGs or as a field upgrade option, Flow Rate Monitoring delivers ongoing flow rate performance data, flow rates for each fueling point, and provides a notification if transactions dip below a user-defined set point.

FLOW RATE MONITORING SELECTION GUIDE

Know Your FlowMonitor for and ensure fast and consistent dispenser throughput with daily reports and alarm notifications regarding flow rate performance. Performance MonitoringSales and dispensing duration data are automatically reconciled to help you better understand the flow performance of every fueling point. Proactive MaintenanceOften, slow flow rates can indicate that a dispenser filter needs to be changed. Be proactive in calling for maintenance, getting dispensers back to peak performance sooner.
FIND THE RIGHT EVO™ SERIES ATG FOR YOUR SITE

FIND THE RIGHT EVO™ SERIES ATG FOR YOUR SITE

The EVO™ Series family of ATGs offers four different options with right-sized features to meet the requirements of your specific application, size, and compliance needs. Which ATG is right for your application?

ATG SELECTION GUIDE

Components

Components
1. Cover 2. LCD touch screen 3. LED indicators 4. Anunciator (audible alarm)
5. RS-485 6. Mini USB port 7. Ethernet / USB port 8. RS-232
9. Knockouts 10. Mounting holes 11. Flip up panel (touch screen) 12. Termination blocks
13. Main board

With pre-configured hardware and customizable software options, these ATGs provide straightforward tank level monitoring and compliance. Their simple setup and operation, remote connectivity, and advanced security features protect your fuel system while keeping you directly connected to vital site data whenever, and wherever.
  • Provides inventory monitoring, static (included feature) and continuous tank testing (optional feature), tank autocalibration, inventory reconciliation, flow rate monitoring and containment compliance monitoring.
  • Both ATGs feature the capability to interface with probes and sensors in any combination up to 6 (EVO™ 200) or 14 (EVO™ 400).
  • Customizable user roles and log-in security features protect against unwanted access while keeping track of user activity within your system.
  • Streamlined setup and programming includes hardware auto-detection and wiring confirmation, multipoint tank charting, network printer auto-detection, and the ability to download and upload entire programming profiles from one ATG to another.
  • Available with optional 24-hour Statistical Continuous Automatic Leak Detection (SCALD) and Turbine Pump Interface (TPI) capability for enhanced and automated submersible turbine pump control.
  • Web interface allows you to directly connect to your ATG via FFS PRO® Connect from any web-enabled device.
  • Optional Wifi allows secure and protected on-site viewing of inventory levels for fuel delivery drivers.
  • Intuitive full-color 7” (17.78 cm) touch screen interface provides simplified on-site access features including:
    • Six available One Touch buttons that are custom programmed to carry out common automated tasks with a single tap.
    • Quick Jump menu allows you to quickly maneuver from application to application using a single button.
    • Programmable product colors.

General

• Maximum tanks monitored: 6 (EVO™ 200) / 14 (EVO™ 400)

• Maximum sensor input capacity: 6 (EVO™ 200) / 14 (EVO™ 400)

• Total # of inputs: 6 (EVO™ 200) / 14 (EVO™ 400)

• Dry contact input channels: 2

• Relay output channels: 2

• Connectivity: Ethernet, RS-232, RS-485, standard USB, mini USB, and Wifi (optional)

• Display type: 7” (17.78 cm) color LCD touch screen

• Printer support: External (network or USB)

• Alarm: Internal audible alarm

• LEDs: Alarm, warning, and power

• Tank chart correction points: 7,500

• Applicable liquids: Petroleum, chemicals, and waste oil

• Level units: Inches, centimeters, and millimeters

• Volume units: gallons or liters (mass with density option)

• Power requirements: 110 to 240 VAC, 50/60 hz, 1.0 Amps max.

• Operating temperature: 32° to 104 °F (0° to 40 °C)

• Humidity: 0-90% non-condensing

• Dimensions: Height: 8” (205mm), Width:13 ¾” (350mm), Depth: 3¼” (83mm)

Capabilities

• High/low product, water, and temperature alarm set points

• Inventory reconciliation / tank auto-calibration / flow rate monitoring (optional)

• Density, mass, and phase separation measurement

• Email and SMS notifications

• Back-up generator monitoring

• MODBUS™ support

Approvals/Certifications

UL, cUL, ATEX, IECEx

• Third party certification of leak detection capabilities


FFS APT FFS CableTight FFS EBW
FFS EVO FFS FE Petro FFS Flex-Ing
FFS Healy FFS Incon FFS UPP

If you have any questions about Franklin Fueling Systems EVO ATGs  or would like to receive a quote, please feel free to contact us at 1-800-451-4021 or Email Us with any further questions or inquiries.


The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo