Tag Archives: Pneumercator

No comments

Pneumercator January 2022 Technical Certification Training Webinar Invitation

  By BlogAdmin December 17, 2021 , , , , ,

2-Day Online Technical Certification Training

When:  January 11 – 12,2022 (2-day online course)
Time:  9AM to 4:30PM Eastern (8AM to 3:30PM Central, 7AM to 2:30PM Mountain, 6AM to 1:30PM Pacific)

Cost: $275.00 per technician. DO NOT EMAIL CREDIT CARD INFO.

To Register: Call 1.631.293.8450 or email robyn@pneumercator.com.  DO NOT EMAIL CREDIT CARD INFO.

NOTE: You will be provided with the webinar link once you have registered. Certification is valid for 2 years

Pneumercator TMS4000Course Overview: This class offers technicians the opportunity to obtain or renew factory certification necessary to perform installation, startup, repair, and maintenance of the select Pneumercator products listed below.


Recommended Experience/Education: All attendees should have some prior experience with the installation and
maintenance of electronic tank gauging and leak detection systems, including general knowledge of NEC/NFPA electrical code requirements, and more specifically, hazardous location classified installation and wiring requirements and safety procedures.
Pneumercator TMS2000

Required Materials: A computer with internet access. Webcam optional. Dial up voice support provided via telephone number upon signing into webinar. Groups may share a computer but a larger screen (i.e. projector, large TV, etc.) is recommended.

Materials Provided:
• Training Presentation via internet link.
• TMS Communicator via internet link.
Certification: Renewal required every 2 years.

Pneumercator LC1000AProducts Covered:

  • LC1000-A Series Non-Discriminating Leak and/or Pt. Level Sensing system.
  • LC2000 Series Discriminating/Non- Discriminating Leak/Pt. Level Sensing system.
  • PC1000 Series pump controller.
  • TMS Series Automatic Tank Management Systems.
      • TMS3000: Multi-Tank Gauging System, 12 Tanks and 40 Leak/Pt. Level Sensors.
      • TMS2000: Two Tank Gauging System, 8 Leak/Pt. Level Sensors.
      • TMS2000W (Wireless): Multi-Tank Gauging System, 12 Tanks and 40 Leak/Pt. Level Sensors.
      • TMS1000: Single-Tank Gauging System, Non-Hazardous Applications, 4 Leak/Pt. Level Sensors.
      • TMS2000A1x: 4-20 mA Input Tank Gauging System, 4 Tanks and 4 Leak/Pt. Level Sensors.

    Pneumercator Probe

    • TMS2000A2x: Resistive Input Tank Gauging System, 4 Tanks and 4 Leak/Pt. Level Sensors.
    • TMS4000: Multi-Tank Gauging System w/Touch Screen, 48 Tanks and 48 Leak/Pt. Level Sensors.
    • TMS4000W (Wireless): Multi-Tank Gauging Sys. w/Touch Screen, 32 Tanks and 128 Leak/Pt. Level Sensors. 
  • Magnetostrictive Probes
  • Sensors
    • Point Level Sensors
      • LS600 Series (includes LS600, LS600W, LS600M, LS600F4, and LS600X)
    • Leak Sensors
      • LS600LD
      • LS610
      • RSU800
      • Pneumercator ES825 SensorES825 (Non-Discriminating and Discriminating)
      • HS100ND
      • HS100D
    • Line Leak Sensors
      • LLP203
  • TMS Communicator
    • TMSComm
    • Autopolling
    • TMS Network Configuration
  • Special Applications using flexible probes: Bulk Storage, Low Ceiling clearance, Chemicals.

See the Pneumercator Technical Certification Training Class Invitation here.

Looking for Pneumercator systems and parts? Pneumercator Liquid Level Control SystemsCheck out our web store!

And if you can’t find what you are looking for, please call us at 1.800.238.1225 or Email Us with any further questions or to place an order!

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

No comments

Pneumercator Technical Certification Training Webinar Invitation

  By BlogAdmin December 1, 2021 , , , ,

2-Day Online Technical Certification Training

When:  December 7-8, 2021 (2-day online course)
Time:  9AM to 4:30PM Eastern (8AM to 3:30PM Central, 7AM to 2:30PM Mountain, 6AM to 1:30PM Pacific)

Cost: $200.00 per technician. DO NOT EMAIL CREDIT CARD INFO.

To Register: Call 1.631.293.8450 or email training@pneumercator.com.  DO NOT EMAIL CREDIT CARD INFO.

NOTE: You will be provided with the webinar link once you have registered. Certification is valid for 2 years

Pneumercator TMS4000Course Overview: This class offers technicians the opportunity to obtain or renew factory certification necessary to perform installation, startup, repair, and maintenance of the select Pneumercator products listed below.


Recommended Experience/Education: All attendees should have some prior experience with the installation and
maintenance of electronic tank gauging and leak detection systems, including general knowledge of NEC/NFPA electrical code requirements, and more specifically, hazardous location classified installation and wiring requirements and safety procedures.
Pneumercator TMS2000

Required Materials: A computer with internet access. Webcam optional. Dial up voice support provided via telephone number upon signing into webinar. Groups may share a computer but a larger screen (i.e. projector, large TV, etc.) is recommended.

Materials Provided:
• Training Presentation via internet link.
• TMS Communicator via internet link.
Certification: Renewal required every 2 years.

Pneumercator LC1000AProducts Covered:

  • LC1000-A Series Non-Discriminating Leak and/or Pt. Level Sensing system.
  • LC2000 Series Discriminating/Non- Discriminating Leak/Pt. Level Sensing system.
  • PC1000 Series pump controller.
  • TMS Series Automatic Tank Management Systems.
      • TMS3000: Multi-Tank Gauging System, 12 Tanks and 40 Leak/Pt. Level Sensors.
      • TMS2000: Two Tank Gauging System, 8 Leak/Pt. Level Sensors.
      • TMS2000W (Wireless): Multi-Tank Gauging System, 12 Tanks and 40 Leak/Pt. Level Sensors.
      • TMS1000: Single-Tank Gauging System, Non-Hazardous Applications, 4 Leak/Pt. Level Sensors.
      • TMS2000A1x: 4-20 mA Input Tank Gauging System, 4 Tanks and 4 Leak/Pt. Level Sensors.

    Pneumercator Probe

    • TMS2000A2x: Resistive Input Tank Gauging System, 4 Tanks and 4 Leak/Pt. Level Sensors.
    • TMS4000: Multi-Tank Gauging System w/Touch Screen, 48 Tanks and 48 Leak/Pt. Level Sensors.
    • TMS4000W (Wireless): Multi-Tank Gauging Sys. w/Touch Screen, 32 Tanks and 128 Leak/Pt. Level Sensors. 
  • Magnetostrictive Probes
  • Sensors
    • Point Level Sensors
      • LS600 Series (includes LS600, LS600W, LS600M, LS600F4, and LS600X)
    • Leak Sensors
      • LS600LD
      • LS610
      • RSU800
      • Pneumercator ES825 SensorES825 (Non-Discriminating and Discriminating)
      • HS100ND
      • HS100D
    • Line Leak Sensors
      • LLP203
  • TMS Communicator
    • TMSComm
    • Autopolling
    • TMS Network Configuration
  • Special Applications using flexible probes: Bulk Storage, Low Ceiling clearance, Chemicals.

See the Pneumercator Technical Certification Training Class Invitation here.

Looking for Pneumercator systems and parts? Pneumercator Liquid Level Control SystemsCheck out our web store!

And if you can’t find what you are looking for, please call us at 1.800.238.1225 or Email Us with any further questions or to place an order!

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

No comments

TMS4000 – Pneumercator’s Latest Addition to the TMS Family of Tank Management Systems

  By BlogAdmin October 18, 2018 , ,

Pneumercator Logo
TMS4000 Tank Management Systems

The TMS4000 is the first touchscreen-based system in the industry available for both indoor and outdoor installation that does not require any type of secondary enclosure or supplemental heating or cooling.

 

 

The 10.4″ large, color SVGA display provides and easy-to-use graphical interface, providing real-time tank data in three distinct formats:

  1. Easy-to-read meters
  2. Detailed spreadsheet
  3. Quick-view bar graphs

Each format is user-configurable and the spreadsheet display prioritizes active or alarming tanks to the top of the window. Leak sensor statuses and alarm acknowledgement are just one touch away.  Simply put, the easiest to navigate in the industry!

And don’t worry if you are an existing TMS2000 or TMS3000 user; Pneumercator thought of you too!  The TMS4000 was designed to work with all your existing probes and sensors, and even your plug-in option cards!

The TMS4000, next generation ATG from Pneumercator designed and built to the same high performance and reliability Pneumercator TMS4000 USBstandards Pneumercator has been manufacturing for over 100 years.

  • Support for up to 48 precision, dual-float magnetostrictive  probes or varying combination of level probes and leak sensors
  • Plug-In I/O Cards provide up to 64 input/output options
  • Standard communications Intefaces:
    • Ethernet TCP/IP
    • USB host and client
    • RS232 (2 standard – expandable to 6)
    • RS485TMS4000 Printer
    • Single, dual or quad ModBus
    • 4-20ma
    • With support for other industrial protocols
  • Full glass touchscreen display
    • Chemically treated
    • 7H hardness
    • high durability and extreme clarity
    • outdoor installation
    • glove-touchable
    • guaranteed not to fog
  • Dedicated LED’s:
    • POWER
    • NORMALPneumercator TMSmobile App for Android
    • ALARM
  • Touch Buttons:
    • ALARM ACKNOWLEDGE
    • Display Brightness
  • TMSmodible app for Android smartphones
  • Email and SMS message alerts
  • … And checkout the many other features if you click here to view the TMS4000 product brochure ( TMS4000 product brochure in Espanol)

TMS4000 Sample ReportClick on the Pneumercator logo to view all Pneumercator currently on our site.  You will find a portion of Pneumercator’s currently offerings, with more being added to the site every day.  If you can’t find it on our site, by all means call us at 1.800.238.1225 or send us an email because if Pneumercator sells it, we can get it!  Click any of the above TMS4000 system images to see the TMS4000 in our web store.

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo