Mix the epoxy slurry, pour it into the channel, and set the riser in place.

Two stainless steel handles are surface-mounted with no penetrations, eliminating potential leak paths.

The watertight lid gasket seals to the side of the sump wall, preventing debris from getting trapped between the lid and the sump to protect the integrity of the seal.

The vapor pressure vent’s thin membrane balances pressure without letting liquid in, making it easier to remove the cover during maintenance.

Three lid latches provide visual confirmation that the lid is appropriately seated and remains in place.

Watertight fiberglass tank sumps come at a standard height of 60” and are adjustable down to 34” in the field to accommodate new and retrofit site conditions.

The side-sealing gasket prevents debris from getting trapped between the lid and the sump, effectively eliminating debris that could compromise the seal.

An injection-molded HDPE construction delivers a durable, yet lightweight, easy-to-handle cover. The ribbed underside provides increased strength and stability.

The lid latches provide a visual verification that the lid is properly in place to deliver a watertight seal. The lid must be fully seated before the lid latches will close.

The two-piece design eliminates confined spaces during installation by allowing the installer to assemble the pipework through the octagonal base without the sump riser in the way.

The octagonal base and riser are constructed with eight flat panels to maximize flexibility of pipe entry locations.

The pour-in-place fill channel makes connecting the sump riser to the base simple, fast, and watertight once installation is complete.

The vapor pressure vent’s thin membrane balances pressure without letting liquid in, making it easier to remove the cover during maintenance.

Two stainless-steel retractable handles are surface-mounted to eliminate any potential leak paths into the lid.

The wide 31” opening provides easy access to tank top equipment.

• Lightweight, 21lbs, injection molded HDPE lid with integrated ribs for added strength.

• The lightweight lid features a side-sealing gasket that locks liquid and debris out.

• Fits under any 36” manway while providing a 31” diameter clear opening for easy access to equipment.

• Two-piece design eliminates confined spaces during installation by allowing the installer to assemble the pipework through the octagonal base without the sump riser in the way.

• Two stainless-steel retractable handles are surface-mounted to eliminate any potential leak paths into the lid.