Category Archives: Maintenance & Repair

No comments

Make Sump Repair Profitable

  By BlogAdmin April 23, 2021 , ,

Discover the world’s leading secondary containment repair solutions at Icon Containment Solutions

Icon’s SplitRepair Fittings are designed to be the most simple approach to any configuration of equipment for faster installations, and we have solutions for any combination of sump type, entry/test fittings, and piping (offset or angled pipe).

Icon SPlitRepair Fittings

Sump leak repair vs equipment replacement provides obvious financial and operational advantages to the UST system owner and can be very profitable for the installing contractor.  Icon’s entire mission is to help the installer be profitable and still provide significant savings to the owner.

Without a doubt, the conditions for sump repair can be challenging as access is often very limiting.  When the sump is repairable, it can be completed successfully and efficiently with the correct applications and support.

GO WITH THE EXPERTS

Icon is exclusively focused on Sump Leak Repair Solutions. Icon’s expertise and range of solutions for any configuration of equipment is unmatched. Use Icon as a resource to develop a more profitable repair business.
Iconfitting 1 Iconfitting 2

SIMPLE

Less installation time in the sump with more reasonable workmanship requirements, and the lowest net cost to completion

PROVEN

Icon direct replacement fitting designs and materials conform to EPA recognized Repair Standard (NLPA/KWA Standard 823) compatibility requirements

PERMANENT

Solutions backed by the Lifetime Warranty on all fittings installed by an Icon Certified Installer

SERVICE

Icon’s #1 priority with Icon direct and ongoing training and technical support for the installer – from initial site survey through testing after successful installation.  Most fitting orders are shipped the same or next day from receipt of the order!
Icon fitting 3 Icon fitting 4

Icon PROTEX Flexible Compression-Seal Repair Fittings have never shown any degradation of material through all independent testing and field application.  And remember, PROTEX repair fittings can be installed in any ambient conditions and wet environments.

IBOND STRUCTURAL BONDER TECHNOLOGY

Icon Rigid Bonded-Seal Repair Fittings utilize IBOND structural bonder technology, which absorbs the kinetic energy from expansion/contraction, heave/settling, vibration, and shock movement in the pipe/sump connection better than any other bonded design, which also have never shown any degradation of material through all  independent testing and field application.

Protex

Icon PROTEX Flexible Compression-Seal Repair Fittings have never shown any degradation of material through all independent testing and field application. Discover all of the advantages of PROTEX today!

WHY PROTEX?
ICON Lifetime Warranty IconProtex  IconQualityAssured

Lifetime Warranty

Every Icon fitting is backed by the Life of Sump Warranty.

PROTEX

Made with PROTEX. Choose fitings designed to last.

Tested and Approved

Independently tested to exceed industry standards
LEARN MORE LEARN MORE LEARN MORE

Feel free to call us at 1.800.451.4021 or email us using the link below to
LEARN MORE & GET A FREE QUOTE

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

2 Comments

Franklin Fueling Systems EVO™ 600 and EVO™ 6000 ATGs FREE ONLINE TRAINING!!

  By BlogAdmin April 2, 2021 , , , , ,








GET CERTIFIED ON THE LATEST ​​​AUTOMATIC TANK GAUGE TECHNOLOGY

For a limited time, we are offering FREE FFS PRO® University online certification for EVO™ 600 and EVO™ 6000 Automatic Tank Gauge Installation / Wiring and Programming.

This free online training is available now through June 30, 2021!!

Franklin Fueling Systems Fueling System Safety A few things to know before you get started on the free training. 

You are required to have an FFSPRO account. If you do not have one, you can register here.

Next, you will be required to take the online Fueling System Safety course. Be aware that if you are not using one of the following browsers, you may encounter functionality and content issues:
⇒ Internet Explorer 9 or later
⇒ Safari 5.1 or later
⇒ Google Chrome 17 or later

Controller Specialist: EVO™ 600 & EVO™ 6000 Installation & Wiring

Controller Specialist: EVO™ 600 & EVO™ 6000 Installation & Wiring EVO™ 600 and EVO™ 6000 automatic tank gauge model overview, installation and wiring of modules, probes, remote alarms, sensors, and Turbine Pump Interface

Begin Presentation          (Login to Take Test!)

 PREREQUISITES:
Fueling System Safety

Site Startup Specialist: EVO™ 600 & EVO™ 6000 Programming

Site Startup Specialist: EVO™ 600 & EVO™ 6000 Programming EVO™ 600 and EVO™ 6000 fuel management & system programming including user/network interfacing, console navigation, initial setup, and optional supported feature programming.

Begin Presentation       (Login to Take Test!)

 PREREQUISITES:
Fueling System Safety

EVO™ 600 & EVO EVO™ 6000

The new EVO™ 600 and EVO™ 6000 ATGs provide highly accurate inventory management and full-featured compliance monitoring for any size fuel system. Advanced features include Corrosion Control™ System automation and monitoring, Electronic Line Leak Detection, and DEF/AdBlue® recirculation.

Be sure to check out our ever-expanding product offerings and great deals from Franklin Fueling’s many brands found in our webstore.

EVO 600 Base Model
EVO 600 Base Model		 EVO 6000 Base Model
EVO 6000 Base Model
FFS APT FFS CableTight FFS EBW
FFS EVO FFS FE Petro FFS Flex-Ing
FFS Healy FFS Incon FFS UPP

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

1 Comment

Combat Corrosion: Is Water Hiding in Your Fueling System?

  By BlogAdmin February 19, 2021 , , , , ,








Is Water Hiding in Your Fueling System?

Is Water Hiding in Your Fuel?

Veeder-Root

Operators of gas stations have a lot on their minds, and the water within their fueling system may seem like a low priority, but there are many reasons to consider water as a serious threat that needs to be removed.

The primary issue is that water, fuel and bacteria, are the three common components that combine to create a corrosive environment around fueling systems. In sump spaces water is often combined with ethanol vapors as the catalyst for microbial growth, but in-tank corrosion is more likely to happen with ultra-low sulfur diesels or biodiesels.

Hidden Below the Surface

Of the three common components, water is the easiest to address but first you need know where it’s hiding.

Many underground storage tanks have magnetostrictive probes with separate water detection floats (1), but they require a minimum water level of ¾” in the probe area to go into alarm. This is great for identifying a catastrophic breech of the tanks integrity but less effective for identifying water that as slowly accumulated below that threshold over time.

Depending on the tilt of your tank there could be stagnate water at the lowest point of your tank (2) that could be a breeding ground for bacteria.
Is Water Hiding

Identifying Water is Key

When microbial growth feeds on components of the fuel, biomass then settles in the water at the bottom of the tank and creates the acidic environment that leads to corrosion. The key to avoiding tank corrosion is identifying the water in the tank and removing it. Once water is removed, one of the common components of the equation is gone and the environment is no longer corrosive.

Learn more about fuel system corrosion, indicators of it, and its impact.

hydrx install

Register for the HydrX Fuel Conditioning System Webinar

This webinar will discuss how the Veeder-Root HydrX Fuel Conditioning System combats in-tank corrosion by eliminating one of the key drivers of microbial growth.

REGISTER NOW!

If you have any questions or would like to purchase Veeder-Root and Red Jacket Products, visit us online at www.johnwkennedyco.com or call us at 1.800.451.4021.

The John W. Kennedy Company appreciates your business and continued support!
JWK USA Logo

No comments

How to Ensure Your Gas Station Success With Adequate Forecourt Maintenance

  By Author April 14, 2019 ,








April 16, 2019, EDITOR’S UPDATE:  The graphic incorrectly states there are 10,700 gas station in the United States when there are about 168,000 and of them, about 126,658 are convenience stores that sell gas.  We apologize for this gross error and thank Pedro De Jesus for bringing it to our attention.

If you are looking for the smooth flow of operations at your gas station then make sure the forecourt of the station receives the appropriate amount of maintenance.

Continue reading

No comments

Take Good Care of Your Gas Station’s Forecourt Canopy

  By Author April 10, 2019 ,








Although, gas station canopies are designed for durability and can last for decades, if not maintained properly, they can fail prematurely and cost you thousands of dollars in replacement. Learn how to take good care of your fueling canopy and avoid major accidents at your gas station by following these exclusive tips from John W. Kennedy Company: Continue reading

No comments

Franklin Fueling Sets an Industry First with Their Let’s Be Frank Podcasts!

  By BlogAdmin January 31, 2019 , , , , ,








Let's Be Frank with Kali Kinziger

 

Franklin Fueling Sets An Industry First With Weekly, Let’s Be Frank podcasts!

Hosted by Kali Kinziger, Let’s Be Frank podcasts are perfect to introduce newbies to the petroleum equipment industry; from the latest products, new technology, install and maintenance tips and tricks to brushing up on the latest industry trends.

 

 

 


How To Hear Let’s Be Frank Podcasts:

  1. Directly on the Let’s Be Frank Website – befrank.ffspro.com
  2. Apple Podcasts –  Search “Franklin Fueling Systems”
  3. Spotify – Search “Let’s Be Frank” or Franklin Fueling Systems

 

 

Let's Be Frank Episode 1: Cable Tight

EPISODE 1: CABLE TIGHT

In the premier episode Kali talks with Allan Busch, Franklin Fueling Systems Piping and Containment and Wire Management Systems Product Manager as to how Cable Tight™ is changing the game for electrical and data wire conduit and what people have to say about the electrofusion welding process.

 

 

 

 

Let's Be Frank Episode 2:

EPISODE 2: DEFENDER SERIES

In episode two, Kali sits down with Nicole Keppy, Franklin Fueling Systems Service Station Hardware Product Manager to chat about how spill containment and overfill prevention valves (OPV) work and what the new UST regulations mean for your existing equipment.

 

 

 

The John W. Kennedy Company appreciates your business and continued support!
JWK USA Logo

No comments

UPDATED 3/19: How to Properly Clean Gilbarco Dispensers

  By BlogAdmin December 6, 2018 , , , , ,








Gilbarco Encore 700

JUST ADDED 3/18/2019: Gilbarco has just released a new document on how to properly clean your diuspensers. Download it here!

Every so often we get asked, “what’s the proper way to clean a dispenser?”  Like anything exposed to the elements, it is going to get dirty and using the improper cleaning techniques or cleaning agents could lead to further damage.    Just like washing your car will extend the luster and life of your vehicle, so will periodically cleaning your dispensers!

Technicians are not responsible to clean dispensers on service calls as this is typically a task that is performed by the station owner/manager.  But it is important that a technician recognize when improper cleaning agents and procedures being implemented by the station show the signs of chemical attack or damage so they can then inform the customer that their methods are doing more harm than good..

 

Gilbarco has put together a document, Proper Cleaning of Dispensers that you can view and download here.

View the full maintenance instructions from MDE-3893 Encore and Eclipse Owner’s Manual here.

It is always extremely important you follow the manufacturer’s recommended procedures, replacement parts and cleaning agents to properly maintain your dispensers to keep them in the most optimal working condition and looking good!  Not only will it cut down on your repair expenses but proper maintenance and cleaning will in crease traffic to your location when it’s looking good and working like a charm.

You can also find and buy replacement parts for your Gilbarco Dispensers in our web store.

Whether you are looking to maintain your station or build one from the ground up, we carry a complete line of products from the top manufacturers in our industry. Thousands of products can be found online at johnwkennedyco.com and if you don’t find what you are looking for there, call us at 1.800.238.1225.

 

 

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

No comments

Is Your Gas Station Prepared for the Storm Season?

  By Author May 15, 2018








The storm season is nearing. Is your gas station prepared?

From May 6 to May 12, 2018, the National Weather Service will be celebrating National Hurricane Preparedness Week.

It’s a weekly program held every year to educate people on how to better prepare themselves for a potential hurricane or land falling tropical storm.

So, is your gas station prepared for the upcoming storm season? Continue reading

No comments

FFS PRO TECH UPDATE – OPV Drop Tube Calculation

  By BlogAdmin May 1, 2018 , , ,








NEW FFS PRO E-Forms Available for Download!

FFS OPV Interactive Calculation Form

OPV Drop Tube Calculation

Franklin Fueling Systems has a new interactive and electronic version of the Defender Series® Overfill Prevention Valve Installation Worksheet that you can download here.  This worksheet can be downloaded and completed by typing values and calculations directly into the form. It does not automatically perform the calculations but does provide typical values in some of the fields that can be adjusted in accordance with local regulations.  You can then save the completed worksheet as a digital file or print it out for a clean and legible worksheet.

 

 

 

Defender Overfill Prevention Valve Inspection Guide & Checklist

STEP-BY-STEP INSPECTION GUIDE AND CHECKLIST

There is also a step-by-step inspection guide and checklist. The Defender Series® Overfill Prevention Valve allows inspection without removal from the tank as explained in the Tech Update you can download here.  Like the calculation worksheet, you can enter all the information directly into the form on the screen then print or save the file digitally.  Again, it will not automatically perform the required calculations necessary to complete the form.

 

 

You can find the Defender Series Overfill Prevention Valve, OPV Remote Testing & Roll Crimping Tools directly on our site:
Defender Series Overfill Prevention Valve

 

Defender Series® Overfill Prevention Valve : You will find the most common configuration on our site with others available. You can see a complete list of the current available choices here.

 

Defender OPV Remote Testing Tool

 

 

708-534-901 OPV Remote Testing Tool

Defender OPV Roll Crimping Tool

 

 

708-535-901 OPV Roll Crimping Tool

 

 

 

Franklin Fueling Systems provides you with the technical information you need to be efficient and accurate in the office or out in the field.  Be sure to visit the FFS PRO Univeristy Campus online today for more technical news, tips and tricks!

 

Please feel free to contact us  at 1.800.238.1225 with any further questions about the Defender Series® overfill protection valves, Franklin Fueling System products or any other refueling equipment questions or needs you currently have.

 

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo