Corrosion in tank sumps is one of the leading causes to to increased maintenance bills due to accelerated corrosion that ultimately will take place. When technicians can’t access equipment in the tank sump environment due to corrosion, service calls take much longer to complete, this increasing labor costs ..unless you do something about it!
Many marketers are now becoming more proactive and taking corrosion inside their tanks sumps much more seriously these days and one of the most cost effective solutions they can reach for Franklin Fueling Systems Desiccant Packs. This simple in-sump solution absorbs humidity in the sump environment before it can begin corrosive damage to components.
Be sure to check out Franklin Fueling Systems Complete Line-up Of Products in Our Web Store!
And if you can’t find it, call us at 1.800.238.1225 or email us and we will be happy to help!!
Don’t hesitate to contact us If you have any questions about Franklin Fueling Systems products or would like to receive a quote. Contact us at 1.800.238.1225 or Email Us with any further questions or inquiries.
The John W. Kennedy Company appreciates your business and continued support!
The use of Ultra Low Sulfur Diesel and an increase in availability of ethanol blends are contributing to the corrosion of in-sump and in-tank equipment. With a special coating and stainless steel parts the Red Armor series of Submersible Turbine Pump (STP) combats corrosive environments ensuring easy maintenance for the life of the pump.
THE RED ARMOR STP: The ultimate survivor in your fueling infrastructure.
Specialty coating on all cast surfaces that withstands acetic acid exposure to prevent pitting and deterioration over time
Stainless Steel construction on all exposed surfaces in the tank & sump space ensures easy maintenance for the life of the pump
Built upon the same field proven Red Jacket STP platform with identical sizes. Fully compatible with fielded “The Red Jacket” STP models for easy upgrade.
Corrosion Protection for Submersible Turbine Pump Sump Space
The new Sump-Dri Desiccant System is an instant in-sump solution for reducing the corrosive effects of moisture in sumps. Designed to maintain moisture- and acetic acid-free conditions in a sump space, preventing deterioration of metal surfaces, including contractor’s boxes, pumps, and conduit.
Key Features:
Ensures the safety and serviceability of your sump-space equipment
Specifically formulated to protect equipment in the STP sump from corrosive conditions
Reduces relative humidity
Neutralizes corrosive acetic acid vapors
Use alone or in conjunction with protective coatings for added insurance
Part Number: Sump-Dri Kit 330020-843 Collection Capacity: 1 gallon Operating Temperature: -4° to 150°F [-20° to 65°C] Size: 15.5″ x 15.5″ x 3.25″ Unsaturated Weight: 5.5 lbs Saturated Weight: 14 lb Desiccant: Formulated specifically to protect against corrosive acetic acid produced by biodegradation Brine:
Brine solution is collected & trapped in the reservoir to limit re-evaporation
Disposal:
Made from non-toxic and recyclable materials
Remove end cap and pour brine solution into sump liquid waste stream
Installation/Mounting:
Included mounting hardware allows Sump-Dri to be hung from STP, or other existing equipment in sump
Carabiner can be used to clip Sump-Dri to STP eyelet other sturdy equipment in the sump. Strap can also be unclipped from Sump-Dri, looped around equipment, then re-attached to the unit
Sump-Dri should be positioned as high as possible in the sump. Height can be adjusted using plastic slide on strap
Sump Requirements: For maximum effectiveness, sump should be tight and free from standing water Desiccant Life/Change Interval:
Sump-Dri expected to last 3-6 months under typical conditions
Sump-Dri will absorb differently based on humidity and temperature conditions and should be changed when desiccant in upper chamber has completely depleted
Shelf Life: 3 years under typical conditions when left in sealed barrier bag