IMPORTANT UPDATE: Hannay Reels Current Factory Lead Times

Hannay ReelsHannay Reels feels blessed and is extremely grateful with the nearly 20% rise in volume this year compared to the same 5-month period in 2017.  The only downside to this successful surge in orders has been the short term affect on product lead times.  Hannay is in the process of additional hiring, more overtime and larger material purchases.  And even then, some of Hannay’s vendors have struggled to keep up with the increased demand.

While adjustments are being made to address the issues, please note that generally speaking, lead times on catalog reels are running on average  of 3 to 5 business days longer than was typical at the start of 2018.  For reels that run through Hannay’s large reel custom shop (such as the spoked-disc aviation and heavy-duty jetter reels), lead times are now running at least a full week longer.

If you have any questions about current expected lead times specific to your own reel model(s), do not hesitate to contact us with any questions at 1.800.451.4021!

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

Morrison Brothers Introduces New 1218 Accessories and FuelCloud Integration

Morrison Brothers LogoMorrison Brothers Company continues to expand its offering of 1218 accessories with the release of four new options:

Morrison Brothers Cellular Gateway

 

The 1218 Cellular Gateway provides a private cellular internet connection with a single Ethernet port that can be used to connect directly to a single device or multiple devices through an Ethernet switch. Click the image to learn more.

 

 

 

Morrison Brothers 1218 External Input/Output Expansion Module

 

 

The 1218 External Input/Output Expansion Module provides an additional six digital input (ordinary Location) and six relay outputs to the 1218 Electronic Tank Gauge that can be configured via the 1218 web interface. Click the image to learn more.

 

 

Morrison Brothers 1218Outdoor Ethernet Switch Assemblies

 

The 1218 Outdoor Ethernet Switch Assemblies connect multiple Ethernet devices together to a network via a single Ethernet connection.  Available in 5-port and 8-port configurations. Click the image to learn more.

 

 

 

Morrison Brothers 1218C FuelCloud Integration

 

 

1218/FuelCloud Integration. Morrison’s 1218 Electronic Tank Gauge is now integrated with FuelCloud’s fuel management system platform. This integration allows FuelCloud account to collect tank inventory information from any Morrison 1218 tank gauge console with internet service vial FuelCloud’s web portal. Click the image to learn more.

 

 

If you would like to learn more or to place an order for any of these 1218 accessories, please contact us at 1.800.451.4021.

 

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

The Red Armor STP for Corrosive Environments

Red Jacket Red Armor STP for Corrosive EnvironmentsBuilt To Survive!

The use of Ultra Low Sulfur Diesel and an increase in availability of ethanol blends are contributing to the corrosion of in-sump and in-tank equipment. With a special coating and stainless steel parts the Red Armor series of Submersible Turbine Pump (STP) combats corrosive environments ensuring easy maintenance for the life of the pump.

 

LEARN ABOUT COMBATING CORROSIONRed Jacket Red Armor STP

 

 

 

THE RED ARMOR STP: The ultimate survivor in your fueling infrastructure.

 

    • Specialty coating on all cast surfaces that withstands acetic acid exposure to prevent pitting and deterioration over time
    • Stainless Steel construction on all exposed surfaces in the tank & sump space ensures easy maintenance for the life of the pump
    • Built upon the same field proven Red Jacket STP platform with identical sizes. Fully compatible with fielded “The Red Jacket” STP models for easy upgrade.

Visit The Product Page                       Download The Data Sheet

 

 

Red Jacket Sump-Dri Dessicant System

Corrosion Protection for Submersible Turbine Pump Sump Space

The new Sump-Dri Desiccant System is an instant in-sump solution for reducing the corrosive effects of moisture in sumps. Designed to maintain moisture- and acetic acid-free conditions in a sump space, preventing deterioration of metal surfaces, including contractor’s boxes, pumps, and conduit.

Key Features:

  • Ensures the safety and serviceability of your sump-space equipment
  • Specifically formulated to protect equipment in the STP sump from corrosive conditions
    •     Reduces relative humidity
      •     Neutralizes corrosive acetic acid vapors
  • Use alone or in conjunction with protective coatings for added insurance

Part Number: Sump-Dri Kit 330020-843
Collection Capacity: 1 gallon
Operating Temperature: -4° to 150°F [-20° to 65°C]
Size: 15.5″ x 15.5″ x 3.25″
Unsaturated Weight: 5.5 lbs
Saturated Weight: 14 lb
Desiccant: Formulated specifically to protect against corrosive acetic acid produced by biodegradation
Brine:

  • Absorbed moisture & neutralized acetic acid vapors create a brine solution
  • Brine solution is collected & trapped in the reservoir to limit re-evaporation

Disposal:

  • Made from non-toxic and recyclable materials
  • Remove end cap and pour brine solution into sump liquid waste stream

Installation/Mounting:

  • Included mounting hardware allows Sump-Dri to be hung from STP, or other existing equipment in sump
  • Carabiner can be used to clip Sump-Dri to STP eyelet other sturdy equipment in the sump. Strap can also be unclipped from Sump-Dri, looped around equipment, then re-attached to the unit
  • Sump-Dri should be positioned as high as possible in the sump. Height can be adjusted using plastic slide on strap

Sump Requirements: For maximum effectiveness, sump should be tight and free from standing water
Desiccant Life/Change Interval:

  • Sump-Dri expected to last 3-6 months under typical conditions
  • Sump-Dri will absorb differently based on humidity and temperature conditions and should be changed when desiccant in upper chamber has completely depleted

Shelf Life: 3 years under typical conditions when left in sealed barrier bag

Visit The Product Page               Download the Sump-Dri Desiccant System Data Sheet

If you would like to learn more or get a quote for the Red Armor STP and/or the Sump-Dri Desiccant System, call us at 1.800.451.4021.

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo

Is Your Gas Station Prepared for the Storm Season?

The storm season is nearing. Is your gas station prepared?

From May 6 to May 12, 2018, the National Weather Service will be celebrating National Hurricane Preparedness Week.

It’s a weekly program held every year to educate people on how to better prepare themselves for a potential hurricane or land falling tropical storm.

So, is your gas station prepared for the upcoming storm season? Continue reading

FFS PRO TECH UPDATE – OPV Drop Tube Calculation

NEW FFS PRO E-Forms Available for Download!

FFS OPV Interactive Calculation Form

OPV Drop Tube Calculation

Franklin Fueling Systems has a new interactive and electronic version of the Defender Series® Overfill Prevention Valve Installation Worksheet that you can download here.  This worksheet can be downloaded and completed by typing values and calculations directly into the form. It does not automatically perform the calculations but does provide typical values in some of the fields that can be adjusted in accordance with local regulations.  You can then save the completed worksheet as a digital file or print it out for a clean and legible worksheet.

 

 

 

Defender Overfill Prevention Valve Inspection Guide & Checklist

STEP-BY-STEP INSPECTION GUIDE AND CHECKLIST

There is also a step-by-step inspection guide and checklist. The Defender Series® Overfill Prevention Valve allows inspection without removal from the tank as explained in the Tech Update you can download here.  Like the calculation worksheet, you can enter all the information directly into the form on the screen then print or save the file digitally.  Again, it will not automatically perform the required calculations necessary to complete the form.

 

 

You can find the Defender Series Overfill Prevention Valve, OPV Remote Testing & Roll Crimping Tools directly on our site:
Defender Series Overfill Prevention Valve

 

Defender Series® Overfill Prevention Valve : You will find the most common configuration on our site with others available. You can see a complete list of the current available choices here.

 

Defender OPV Remote Testing Tool

 

 

708-534-901 OPV Remote Testing Tool

Defender OPV Roll Crimping Tool

 

 

708-535-901 OPV Roll Crimping Tool

 

 

 

Franklin Fueling Systems provides you with the technical information you need to be efficient and accurate in the office or out in the field.  Be sure to visit the FFS PRO Univeristy Campus online today for more technical news, tips and tricks!

 

Please feel free to contact us  at 1.800.238.1225 with any further questions about the Defender Series® overfill protection valves, Franklin Fueling System products or any other refueling equipment questions or needs you currently have.

 

The John W. Kennedy Company appreciates your business and continued support!

JWK USA Logo