OPW Non UL Farm Nozzles – Hold Open Racks

OPW Corporate Logo

After numerous complaints about  no racks on Farm nozzles,  OPW has elected to offer  the following nozzles with hold open racks and without the UL 2586 approval.

These farm nozzles can be used in applications that don’t require a 3rd party approval and don’t require UL2586 approval.

OPWFarmNozOPWFarmNoz_2

Feel free to contact us at 1.800.451.4021 with any questions or to place your order today!


We appreciate your business and thank you for your continued support!

JWK Logo

Passport Product Alert: Okidata Laser Printer – Troubleshooting Tip

Okidata_logo

Paper-Jam-Office-Space

Are you experiencing excessive paper jams with the Okidata Laser Report Printer? If so, this may be caused by the use of recycled printer paper – Use of this type of paper will cause excessive jams that may damage the printer. Many recycled papers are not designed for laser printers and do not meet the minimum specifications for laser printer paper.

Recommendation:
If you are using recycled paper, the TRAY 1 MEDIA TYPE in the MEDIA MENU should be set to RECYCLE. Use only recycled paper specific for laser printers that does not exceed 50% post-consumer content.

Feel free to contact us at 1.800.451.4021 with any questions.


We appreciate your business and thank you for your continued support!

JWK Logo

Franklin Fueling TB0515-02 Shared Learning – STP in Water Ballasted Tanks

Franklin logo

Reproduced from Technical Bulletin provided by Steve Langlie, Technical Service Manager Franklin Fueling Systems

While it is well known in the fueling industry that Submersible Turbine Pumps (STPs) should not be exposed to water, we are occasionally asked for guidance on best practices for when underground storage tanks are water-ballasted. The attached Shared Learning document gives guidelines for dealing with STPs in water.

View the below technical bulletin for the specifics of dealing with water-ballasted tanks:

Please contact FFS Technical Services directly at +1-608-838-8786 or Kennedy’s 1-800-451-4021 at if you have any questions regarding this information.

We appreciate your business and thank you for your continued support!

JWK Logo

Morrison Brothers Kick Starts the Summer with These New Products….

 

Morrison Sensors 3

Reproduced from Morrison Brothers’ June Newsletter provided by Jerry Schollmeyer

Morrison Sensors 1NEW Adjustable level Sensors

Morrison Brothers is kicking off summer with the release of their new 924/924S adjustable level sensors! These float-activated simple switch devices are compatible with our 918S/D/Q Alarm Boxes and Morrison’s 918AC System Interface. Read the full Model 924 new product announcement here.

 

 

Adjustable Level Sensor with AlarmMorrison Sensors 2

For your ordering convenience, the 918S alarm box and a 924 (or 924S) sensor can be ordered as an assembled kit. See table below for available kits or view the 918S Alarm with 924 Adjustable Level Sensor new product announcement here for more details.

Morrison Sensors 3

If you would like to learn more about or wish to order the above products, please call us at 1.800.451.4021.

We appreciate your business and thank you for your continued support!

JWK Logo